Pellet

Pellet Stoves

Pellet stoves offer the warmth of heating with wood along with automatic features such as self-lighting capability and thermostatic regulation. Wood pellets are made from compressed sawdust so this fuel source is 100% recycled and all natural. Pellet appliances are ideal when longer burn times are needed. Most units hold 60-120 lbs of pellets and can last up to several days on a load. They don’t require a chimney to operate. An exhaust/ combustion fan allows for convenient side wall venting. Since pellet stoves use a convection fan to distribute the heat created by a small fire out into the room, the back and sides of the stove don’t get hot, allowing for low clearances to combustible walls.

*Click on any image below to view a larger version

Harman XXV
Hearthstone Heritage
53,000 BTUs
Heats up to 1,700 sq ft.
(shown in brown enamel)
heritagepellet_brown_enamel 51,000 BTUs
Heats up to 2,000 sq ft.
For more Harman pellet stoves – click HERE For more Hearthstone pellet stoves – click HERE
Enerzone Eurostar
Harman P68
50,000 BTUs
Heats up to 2,400 sq ft.
68,000 BTUs
Heats up to 2,200 sq ft.
For more Enerzone pellet stoves – click HERE For more Harman pellet stoves – click HERE
Lopi AGP
Quadrafire Mt. Vernon E2
45,000 BTUs
Heats up to 2,000 sq ft.
Mt. Vernon E2 - Photo (Frost, 4C, High Res) copy 52,460 BTUs
Heat up to 2,500 sq ft.
For more Lopi pellet stoves – click HERE For more Quadrafire pellet stoves– click HERE

> Questions? Contact Us

 

Pellet Inserts

Pellet inserts are designed to fit into most fireplaces, masonry as well as factory built models. While the hoppers and ash pans are smaller to allow the unit to fit inside the existing fireplaces, the heat output is the same as on freestanding models and larger units heat in excess of 2,000 square feet. A stainless steel liner should be used inside the chimney to vent to outside. Some models can also be installed as built-ins, for applications where there currently is no fireplace at all.

Click here for a form to help you measure your masonry fireplace for an insert

Click here for a form to help you measure your metal fireplace for an insert

*Click on any image below to view a larger version

Quadrafire Castile
Lopi AGP
34,400 BTUs
Heats up to 1,700 sq ft.
108389 41,000 BTUs
Heats up to 2,000 sq ft.
For more Quadrafire inserts – click HERE For more Lopi pellet inserts– click HERE
Harman Accentra Insert
Harman P35i
52,000 BTUs
Heats up to 1,800 sq ft.
35,000 BTUs
Heats up to 1,400 sq ft.
For more Harman pellet inserts – click HERE For more Harman pellet inserts– click HERE

 

>Questions? Contact Us